How do you measure a go kart drive belt?

How long is a Go Kart belt?

Go Kart belt in black. Width: 0.75″ Length: 27-1/32″

How long is a 30 Series torque converter belt?


Specification Description
Brand Masters Of Motion
Product Weight 1 lb.
Product Length 12 in.
Application/Use 30 Series Torque Converter Drive Belt

How do you measure a snowmobile belt?

Measure the width of the belt. Use a tape measure to measure the width of the belt in a number of different places. Confirm the measurements with a caliper and record the measurement. The new belt purchased should be the exact same width to properly fit on the clutches.

What’s the difference between 30 and 40 Series torque converter?

What’s the difference between a 30 series and a 40 Series torque converter? Actually you have it backwards, the 30 is asymmetrical(one side of belt/pulleys is flat), 40 is symmetrical(V belt). … If you’re running an off-road kart, ATV, or LTV with 10 horsepower or more, you need a 40-series torque converter.

How do I know if my go kart torque converter is bad?

Troubleshooting Your Go Kart Torque Converter

  1. What Does a Go Kart Torque Converter Do? …
  2. Kart Moves While Engine Is Idling. …
  3. Sluggish, Jerky and Poor Acceleration. …
  4. Belt-edge Cord Breakage. …
  5. Broken or Torn Cogs. …
  6. Worn-out Belt in Just One Portion. …
  7. Drive Clutch Turns as the Engine Idles. …
  8. Belt is Concave on Sides.
THIS IS INTERESTING:  Is Formula 3 a spec series?


How do I know what size torque converter belt I need?

Simply take a measuring tape and hold it against the outer plate of the pulley. Measure from one side of the plate to the opposite side. If you’re running a standard torque converter the diameter will either be 6-inches, 7-inches, 7.5-inches or 8.5-inches.

Why does the belt on my go kart keep breaking?

From what I can see from your pictures, your drive pulley (small) is out of alignment with the driven pulley (large) this will cause it to chew up belts quickly. Also there is too much slack in the belt. the belt should be snug (not tight) between the two pulleys in order for the variable speed to work correctly.

What belt do I need for my car?

There are two belts you need to be familiar with when talking about car maintenance — the serpentine belt and the timing belt. The serpentine belt winds through your engine and carries power to several key components, including the alternator, air conditioning, and power steering pump.

How do I know my chain size?

To measure the chain size, if you have just the sprocket, use calipers to measure between the teeth. Measure from center to center of where the chain roller would set between the teeth that will give you the pitch. Once you know the pitch you can determine what chain size you would need.

Does a Go Kart need a clutch?

The purpose of a clutch is to disengage and engage the engine from the load it is pulling. The necessity of disengaging the clutch is equally important for safety as it is for performance. Gas engines in particular all the time and need to be disengaged when the gokart is being stopped or slowed down.

THIS IS INTERESTING:  Is Nascar Heat 5 on Xbox game pass?
Auto racing blog